EVoPJsOaVgLbAb8zwWFFdIxyr4qXXjibibU8zGpo
Bookmark

Units and Dimensions in A-Level Physics: S.I. Units, Homogeneity & Worked Examples

Units and Dimensions in A-Level Physics: S.I. Units, Homogeneity & Worked Examples

1. UNITS AND DIMENSIONS

1.1 Physical Quantities

In physics, precision and accuracy in observation and measurement are essential. Any property or measurement that can be quantified is referred to as a physical quantity.

Common examples include length, mass, time, weight, electric current, force, velocity, and momentum.

A complete physical quantity requires two components: a numerical magnitude and a measurement unit[. For instance, if a boy's height is $1.75\text{ m}$, the numerical value is $1.75$ and the unit of height is the metre ($\text{m}$).

1.2 S.I. Units

Measuring a physical quantity depends on a defined reference standard called a unit. Different amounts of the same quantity are expressed by comparing them against this standard unit.

For example, when a rod measures $2\text{ m}$, the physical quantity being measured is length, and the unit used is the metre ($\text{m}$).

Length can also be expressed in other units such as feet, yards, and miles. Although conversion factors allow switching between units, working across multiple unit systems can create unnecessary complexity in scientific work.

To standardize measurements globally, scientists adopted Le Système Internationale, commonly known as the S.I. system. A key benefit of S.I. is that each physical quantity is assigned a single standard unit, with metric prefixes used to scale units up or down.

Table 1.1 Prefixes used in S.I.
Prefix Multiplying factor Symbol
pico $10^{-12}$ $\text{p}$
nano $10^{-9}$ $\text{n}$
micro $10^{-6}$ $\mu$
milli $10^{-3}$ $\text{m}$
centi $10^{-2}$ $\text{c}$
deci $10^{-1}$ $\text{d}$
kilo $10^{3}$ $\text{k}$
mega $10^{6}$ $\text{M}$
giga $10^{9}$ $\text{G}$
tera $10^{12}$ $\text{T}$

1.3 Basic Quantities and Base Units

Just as raw materials like stone, water, wood, steel, or glass are combined to construct structural parts of a building—such as doors, walls, windows, floors, roofs, and stairs—complex physical concepts build upon fundamental ones.

In the S.I. system, seven fundamental quantities are selected as basic quantities, and their corresponding units are called base units.

Basic Quantities Base Units Symbols
Length metre $\text{m}$
Mass kilogram $\text{kg}$
Time second $\text{s}$
Electric current ampere $\text{A}$
Temperature kelvin $\text{K}$
Amount of substance mole $\text{mol}$
Luminous intensity candela $\text{cd}$

1.4 Derived Quantities and Derived Units

Quantities formed from combinations of basic quantities are known as derived quantities, analogous to how building components are made from raw materials. Their corresponding measurements are called derived units.

Derived units follow directly from how a derived quantity relates to basic quantities, and several have dedicated names.

Examples of derived quantities and their units:

Derived Quantities Derived Units
Area $\text{m}^2$
Volume $\text{m}^3$
Density $\text{kg m}^{-3}$
Velocity $\text{m s}^{-1}$
Acceleration $\text{m s}^{-2}$
Force $\text{N}$ or $\text{kg m s}^{-2}$
Pressure $\text{Pa}$ or $\text{kg m}^{-1}\text{ s}^{-2}$
Energy $\text{J}$ or $\text{kg m}^2\text{ s}^{-2}$
Power $\text{W}$ or $\text{kg m}^2\text{ s}^{-3}$
Electric charge $\text{C}$ or $\text{A s}$
Voltage $\text{V}$ or $\text{kg m}^2\text{ s}^{-3}\text{ A}^{-1}$
Resistance $\Omega$ or $\text{V A}^{-1}$

1.5 Dimensions

The dimensions of a physical quantity describe how it is built from basic quantities—specifically length ($L$), mass ($M$), time ($T$), electric current ($A$), temperature ($\theta$), and amount of substance ($N$).

Square brackets around a physical quantity, written as $[\text{physical quantity}]$, denote its dimensions.

Examples:

  1. $$[\text{Area}] = [\text{length} \times \text{breadth}] = L \times L = L^2$$

    Unit for area $= \text{m}^2$

  2. $$[\text{Velocity}] = \left[\frac{\text{displacement}}{\text{time}}\right] = \frac{L}{T} = LT^{-1}$$

    Unit for velocity $= \text{m s}^{-1}$

  3. $$[\text{Acceleration}] = \left[\frac{\text{change in velocity}}{\text{time}}\right] = \frac{LT^{-1}}{T} = LT^{-2}$$

    Unit for acceleration $= \text{m s}^{-2}$

  4. $$[\text{Force}] = [\text{mass} \times \text{acceleration}] = MLT^{-2}$$

    Unit for force $= \text{N} = \text{kg m s}^{-2}$

  5. $$[\text{Work}] = [\text{force} \times \text{displacement}] = MLT^{-2} \times L = ML^2T^{-2}$$

    Unit for work $= \text{J} = \text{kg m}^2\text{ s}^{-2}$

  6. $$[\text{Electric charge}] = [\text{current} \times \text{time}] = AT$$

    Unit for electric charge $= \text{C} = \text{A s}$

  7. $$[\text{Frequency}] = \left[\frac{1}{\text{period}}\right] = \frac{1}{T} = T^{-1}$$

    Unit for frequency $= \text{Hz} = \text{s}^{-1}$

  8. $$[\text{Strain}] = \left[\frac{\text{extension}}{\text{original length}}\right] = \frac{L}{L}$$

    which is non-dimensional or dimensionless.

1.6 Uses of Units and Dimensions

To check the homogeneity of physical equations

Valid physical equations hold regardless of the unit system chosen, and every term within the equation shares identical dimensions and units. Addition, subtraction, or equality is only meaningful between terms of matching dimension; an equation with matching dimensions across all terms is called homogeneous.

$$s = ut + \frac{1}{2}at^2$$

connects displacement $s$, initial velocity $u$, time $t$, and uniform acceleration $a$.

$$\text{Unit for } s = \text{m}$$ $$\text{Unit for } ut = \text{m s}^{-1} \times \text{s} = \text{m}$$ $$\text{Unit for } \frac{1}{2}at^2 = \text{m s}^{-2} \times \text{s}^2 = \text{m}$$

Every term in this expression shares the same unit, which is $\text{m}$. Therefore, $s = ut + \frac{1}{2}at^2$ satisfies dimensional homogeneity.

Consider an alternative expression a student might write:

$$s = ut^2 + \frac{1}{2}at$$

Evaluating each term using base units gives:

$$\text{Unit for } s = \text{m}$$ $$\text{Unit for } ut^2 = \text{m s}^{-1} \times \text{s}^2 = \text{m s}$$ $$\text{Unit for } \frac{1}{2}at = \text{m s}^{-2} \times \text{s} = \text{m s}^{-1}$$

Because the terms do not share identical units, the expression is not homogeneous and must therefore be incorrect.

While a lack of homogeneity guarantees an equation is wrong, having identical units across all terms does not guarantee correctness. An equation can still be homogeneous yet invalid in several situations:

1. Incorrect Coefficient(s)

For uniformly accelerated motion, the valid relation among $s$, $u$, $t$, and $a$ is:

$$s = ut + \frac{1}{2}at^2$$

Consider this erroneous variation:

$$s = \frac{1}{2}ut + 2at^2$$

Although every term has consistent units, the expression is invalid because the first term on the right uses $\frac{1}{2}$ instead of $1$, and the final term uses $2$ instead of $\frac{1}{2}$.

2. Missing Terms

The relation involving $s$, $u$, $t$, and $a$ might be written simply as:

$$s = \frac{1}{2}at^2$$

Even though this expression is homogeneous, it is incomplete and incorrect.

3. Extra Terms

Conversely, a valid relation might have an extraneous term added that carries the same unit or dimension as the other terms, such as:

$$s = ut + vt + \frac{1}{2}at^2$$

Experimental testing is what ultimately verifies whether a physical equation is accurate, as shown in the following example.

Example 1.1

  1. Define what is meant by the dimension of a physical quantity.

  2. The oscillation period $T$ of a tuning fork depends on its density $\rho$, Young's modulus $E$, and length $l$. Which of the candidate formulas below could connect $T$ to these quantities?

    1. $$T = \frac{A\rho}{E}\sqrt{gl^3}$$
    2. $$T = Al\sqrt{\frac{\rho}{E}}$$
    3. $$T = \frac{AE}{\rho}\sqrt{\frac{l}{g}}$$

    Here $A$ is a dimensionless constant and $g$ denotes gravitational acceleration.

  3. The data table below comes from measurements on geometrically similar steel tuning forks:

    Frequency $f / \text{cycle s}^{-1}\ (\text{Hz})$ $256$ $288$ $320$ $384$ $480$
    Length $l / \text{cm}$ $12.0$ $10.6$ $9.6$ $8.0$ $6.4$

    Use these measurements to test the candidate equations you selected. Then calculate the constant $A$ given that for steel, $E = 2.0 \times 10^{11}\text{ N m}^{-2}$ and $\rho = 8\,500\text{ kg m}^{-3}$. [Unit for $E$: $\text{kg m}^{-1}\text{ s}^{-2}$] (June 69)

Solution:

  1. A physical quantity's dimension expresses how it relates to fundamental quantities such as mass $M$, length $L$, time $T$, electric current $A$, temperature $\theta$, and amount of substance $N$.

  2. Unit for period $T = \text{s}$.

    For equation (i), $T = \frac{A\rho}{E}\sqrt{gl^3}$:

    $$\text{Unit for } \frac{A\rho}{E}\sqrt{gl^3} = \frac{\text{kg m}^{-3}}{\text{kg m}^{-1}\text{ s}^{-2}}\left(\text{m s}^{-2} \times \text{m}^3\right)^{\frac{1}{2}} = \text{s}$$

    $\therefore$ Equation (i) is homogeneous and can be used.

    For equation (ii), $T = Al\sqrt{\frac{\rho}{E}}$:

    $$\text{Unit for } Al\sqrt{\frac{\rho}{E}} = \text{m}\left(\frac{\text{kg m}^{-3}}{\text{kg m}^{-1}\text{ s}^{-2}}\right)^{\frac{1}{2}} = \text{s}$$

    $\therefore$ Equation (ii) is also homogeneous, and can be used.

    For equation (iii), $T = \frac{AE}{\rho}\sqrt{\frac{l}{g}}$:

    $$\text{Unit for } \frac{AE}{\rho}\sqrt{\frac{l}{g}} = \frac{\text{kg m}^{-1}\text{ s}^{-2}}{\text{kg m}^{-3}}\left(\frac{\text{m}}{\text{m s}^{-2}}\right)^{\frac{1}{2}} = \text{m}^2\text{ s}^{-1}$$

    which is different from the unit for $T$ (i.e., $\text{s}$).

    $\therefore$ equation (c) cannot be used.

  3. Frequency $f / \text{cycle s}^{-1}\ (\text{Hz})$ $256$ $288$ $320$ $384$ $480$
    Period $T / (\times 10^{-3}\text{ s})$ $3.91$ $3.47$ $3.13$ $2.60$ $2.08$
    Length $l / \text{cm}$ $12.0$ $10.6$ $9.6$ $8.0$ $6.4$
    $l^{\frac{3}{2}} / \text{cm}^{\frac{3}{2}}$ $41.6$ $34.5$ $29.7$ $22.6$ $16.2$
    Graphs: (1) $T$ against $l$  |  (2) $T$ against $l^{\frac{3}{2}}$ (vertical axis: $T / \times 10^{-3}\text{ s}$; horizontal axis: $l / \text{cm}$ and $l^{\frac{3}{2}} / \text{cm}^{\frac{3}{2}}$)

    curve (1) plots $T$ versus $l$, while curve (2) plots $T$ versus $l^{\frac{3}{2}}$, passing through the origin.
    Based on the plotted data, $T$ versus $l$ forms a straight line passing through the origin, confirming that $T = Al\sqrt{\frac{\rho}{E}}$ is the valid relation.

While the plot of $T$ versus $l^{\frac{3}{2}}$ forms a straight line, it does not pass through the origin. Consequently, the expression $T = \frac{A\rho}{E}\sqrt{gl^3}$ is invalid.

Using $T = Al\sqrt{\frac{\rho}{E}}$ along with the recorded data, when $l = 12.0\text{ cm}$, $T = 3.91 \times 10^{-3}\text{ s}$.

$$ \begin{aligned} A &= \frac{T}{l}\sqrt{\frac{E}{\rho}} \\ &= \frac{3.91 \times 10^{-3}}{0.12}\sqrt{\left(\frac{2.0 \times 10^{11}}{8\,500}\right)} \\ &= 158 \end{aligned} $$

Example 1.2

At temperatures approaching $0\text{ K}$, a certain solid has a specific heat capacity described by $c = aT^3$, where $T$ represents thermodynamic temperature and $a$ is a constant. Determine the S.I. base units for the constant $a$.

Solution:

$$ \begin{aligned} \text{Unit for specific heat capacity, } c &= \text{J kg}^{-1}\text{ K}^{-1} \\ &= \text{N m kg}^{-1}\text{ K}^{-1} \\ &= \text{kg m s}^{-2}\text{ m kg}^{-1}\text{ K}^{-1} \\ &= \text{m}^2\text{ s}^{-2}\text{ K}^{-1} \end{aligned} $$

From $c = aT^3$,

$$a = \frac{c}{T^3}$$ $$ \begin{aligned} \therefore \text{ unit for } a &= \frac{\text{m}^2\text{ s}^{-2}\text{ K}^{-1}}{\text{K}^3} \\ &= \text{m}^2\text{ s}^{-2}\text{ K}^{-4} \end{aligned} $$

Example 1.3

Between two liquid layers sharing a contact surface area $A$ across a velocity gradient $\frac{dv}{dx}$, the viscous drag force $F$ follows the relation:

$$F = \eta A \frac{dv}{dx}$$

Here $\eta$ denotes the liquid's coefficient of viscosity. Find the dimensions of $\eta$, and express its unit in terms of S.I. base units.

Solution:

$$F = \eta A \frac{dv}{dx}$$ $$\eta = \frac{F}{A\frac{dv}{dx}}$$ $$ \begin{aligned} [\eta] &= \frac{[F]}{[A]\left[\frac{dv}{dx}\right]} \\ &= \frac{MLT^{-2}}{L^2 \times \left(\frac{LT^{-1}}{L}\right)} \\ &= ML^{-1}T^{-1} \end{aligned} $$

$\therefore$ unit for $\eta = \text{kg m}^{-1}\text{ s}^{-1}$

Quick Revision Summary:
  • Every physical quantity requires a numerical value and a unit.
  • Homogeneous equations have identical base units in every term, though homogeneous equations can still fail due to wrong coefficients, missing terms, or extra terms.
Common Exam Pitfall:

Proving dimensional homogeneity is necessary, but not sufficient to prove an equation is physically correct. Always verify experimental graphs (straight line passing through the origin) when testing candidate formulas.

Question 1: Determine the S.I. base units required for $k$ so that $\text{velocity} = k \times \text{density}$ is dimensionally consistent.

Click to view step-by-step solution
$$[k] = \frac{[\text{velocity}]}{[\text{density}]} = \frac{LT^{-1}}{ML^{-3}} = M^{-1}L^{4}T^{-1}$$

Therefore, the S.I. base unit for $k$ is $\text{kg}^{-1}\text{ m}^4\text{ s}^{-1}$.

Dengarkan
Pilih Suara
1x
* Mengubah pengaturan akan membuat artikel dibacakan ulang dari awal.