Physics A Level Vol I
A Level Physics Volume 1: Complete Syllabus & Contents Guide
A comprehensive learning guide covering Mechanics, Oscillations, Materials, and Thermal Physics for A Level Physics students.
About A Level Physics Volume 1
A Level Physics Volume 1 covers the core foundational pillars of physics—from units, measurement uncertainties, and mechanics to oscillations, elasticity, and thermal physics—that form the backbone of many international A Level physics programmes.
Whether you are developing mathematical problem-solving skills in kinematics, dynamics, circular motion, and gravitation, or mastering experimental methods and thermodynamic principles for structured and data-analysis examination papers, this comprehensive contents guide helps students, independent learners, and educators study every topic systematically.
A Level Physics Volume 1: Chapters 1–17
Explore all chapters, subtopics, and self-evaluation exercises to strengthen your understanding of fundamental physics concepts.
| Chapter | Topic / Chapter Title | Subtopics | Self-Evaluation Exercise |
|---|---|---|---|
| Chapter 1 | Units and Dimensions | 1.1 Physical Quantities | Distinguish between fundamental and derived physical quantities with two examples each. |
| 1.2 SI Units | Convert 72 km/h and 2.5 g/cm³ into standard SI units without error. | ||
| 1.3 Basic Quantities and Base Units | List all seven SI base quantities, their symbols, and their corresponding base units. | ||
| 1.4 Derived Quantities and Derived Units | Express power, pressure, and impulse strictly in terms of SI base units. | ||
| 1.5 Dimensions | Determine the dimensional formula of force, kinetic energy, and angular momentum. | ||
| 1.6 Uses of Units and Dimensions | Check whether the equation v² = u² + 2as is dimensionally homogeneous. | ||
| 1.7 Deriving Physical Equations | Use dimensional analysis to find how the period of a simple pendulum depends on length l and g. | ||
| Chapter 2 | Measurements | 2.1 Systematic Errors | Identify two causes of systematic error in a micrometer screw gauge and state how to fix them. |
| 2.2 Random Errors | Explain how taking repeated readings and plotting a line of best fit reduces random error. | ||
| 2.3 Precision and Accuracy | Sketch target/measurement examples showing high precision with low accuracy versus high accuracy. | ||
| 2.4 Compound Errors | Calculate the percentage uncertainty in density given fractional uncertainties in mass and radius. | ||
| Chapter 3 | Vectors | 3.1 Scalar Quantities | Explain why work and temperature are scalars even when changes can be negative. |
| 3.2 Vector Quantities | State two defining properties of a vector and give three examples from mechanics. | ||
| 3.3 Addition of Vectors | Find the magnitude and direction of the resultant of a 6.0 N force east and an 8.0 N force north. | ||
| 3.4 Subtraction of Vectors | Determine the change in velocity Δv when an object moving at 10 m/s east turns 10 m/s north. | ||
| 3.5 Resolving a Vector | Resolve a 50 N force acting at 37° above the horizontal into horizontal and vertical components. | ||
| 3.6 Triangle of Forces | Explain how a closed triangle of three coplanar forces represents translational equilibrium. | ||
| 3.7 Polygon of Forces | Construct a scaled vector polygon for four concurrent forces acting on a point mass. | ||
| 3.8 Resultant of a Number of Forces | Use component summation (ΣFx and ΣFy) to find the net force on an object. | ||
| Chapter 4 | Static Equilibrium | 4.1 Moment of a Force | Calculate the moment of a 25 N force applied at a perpendicular distance of 0.40 m from a pivot. |
| 4.2 Equilibrium of a Rigid Body | State both conditions (ΣF = 0 and Στ = 0) required for complete static equilibrium. | ||
| 4.3 Torque and Couple | Calculate the torque of a couple consisting of two 15 N antiparallel forces separated by 0.20 m. | ||
| 4.4 Centre of Gravity | Define centre of gravity and explain when it coincides with the centre of mass. | ||
| 4.5 Determining the Centre of Gravity of a Lamina | Describe the plumb-line experiment to locate the centre of gravity of an irregular flat card. | ||
| 4.6 Centre of Mass | Find the centre of mass of two masses (2.0 kg at x = 0 and 4.0 kg at x = 6.0 m). | ||
| 4.7 Stability | Compare stable, unstable, and neutral equilibrium using potential energy and base-of-support shifts. | ||
| Chapter 5 | Kinematics | 5.1 Motion Under Uniform Acceleration | Solve a constant-acceleration problem using SUVAT equations to find stopping distance and time. |
| 5.2 Graphical Methods | Relate the gradient of a displacement-time graph to velocity and area under a velocity-time graph to displacement. | ||
| 5.3 Projectile Motion | Calculate the range and maximum height of a projectile launched at 20 m/s at 30° above level ground. | ||
| Chapter 6 | Dynamics | 6.1 Newton's Laws of Motion | Apply Newton's second law to a mass accelerating up an inclined plane with tension and friction. |
| 6.2 Linear Momentum | State the principle of conservation of linear momentum and the conditions required for it to hold. | ||
| 6.3 Collision | Distinguish between elastic and inelastic collisions in terms of kinetic energy and relative speed. | ||
| 6.4 Pressure Exerted by a Jet of Liquid | Derive and apply the force equation F = ρAv² for a water jet hitting a wall normally. | ||
| 6.5 Pressure on a Wall due to Bombardment of Elastic Particles | Explain how momentum transfer per collision produces steady average pressure on a boundary wall. | ||
| 6.6 Work, Energy and Power | Calculate the useful power output of a motor lifting a 500 kg load steadily at 1.2 m/s. | ||
| 6.7 Friction | Compare static and kinetic friction and explain how normal reaction affects maximum friction. | ||
| 6.8 Viscosity | Define viscosity and describe how drag force varies with speed for a sphere in a viscous fluid. | ||
| Chapter 7 | Pressure in Liquids and Archimedes' Principle | 7.1 Pressure in Liquids | Calculate hydrostatic gauge pressure at a depth of 15 m in seawater (ρ = 1030 kg/m³). |
| 7.2 Archimedes' Principle | Determine the upthrust on a completely submerged block of volume 4.0 × 10⁻⁴ m³ in water. | ||
| Chapter 8 | Circular Motion | 8.1 Angular Velocity | Convert 120 rpm into rad/s and find the linear speed of a point at radius 0.25 m. |
| 8.2 Centripetal Acceleration | Calculate the centripetal acceleration of a car moving at 15 m/s around a bend of radius 30 m. | ||
| 8.3 Examples of Motion in a Circle | Identify the source of centripetal force for a conical pendulum, banked track, and vertical loop. | ||
| 8.4 Rotational Motion | Write the rotational analogues of displacement, velocity, and acceleration for rigid-body rotation. | ||
| 8.5 Moment of Inertia | Explain why moment of inertia depends on both mass and its distribution relative to the axis. | ||
| 8.6 Rotational Kinetic Energy | Calculate the rotational kinetic energy of a flywheel with I = 0.50 kg·m² spinning at 20 rad/s. | ||
| 8.7 Torque | Apply τ = Iα to find the angular acceleration produced by a net torque on a rotating wheel. | ||
| 8.8 Angular Momentum | Explain how an ice skater increases angular speed by pulling arms inward using conservation of L. | ||
| Chapter 9 | Universal Gravitation | 9.1 Newton's Law of Universal Gravitation | Calculate the gravitational force between two 100 kg masses separated by 2.0 m. |
| 9.2 Relationship Between G and g | Derive g = GM/R² at a planet's surface and state what each symbol represents. | ||
| 9.3 Relationship Between Period and Radius of Orbit of a Planet | Show that T² ∝ r³ for a circular orbit under central gravitational attraction. | ||
| 9.4 Satellite System of the Earth | Explain why orbiting astronauts experience apparent weightlessness despite strong gravity. | ||
| 9.5 Synchronous Satellite | State the orbital period and equatorial plane requirement for a geostationary satellite. | ||
| 9.6 Gravitational Field | Define gravitational field strength g and sketch field lines around a point mass. | ||
| 9.7 Variation of g with Distance from the Centre of the Earth | Plot and explain how g decreases as 1/r² for distances r ≥ R from Earth's centre. | ||
| 9.8 Variation of g with Distance below the Earth's Surface | Explain why g decreases linearly with depth below the surface assuming uniform Earth density. | ||
| 9.9 Variation of g with Latitude | Explain why effective g is slightly smaller at the equator than at the poles due to rotation and shape. | ||
| 9.10 Gravitational Potential | Define gravitational potential φ at a point and explain why its value is negative. | ||
| 9.11 Gravitational Potential Energy | Calculate the change in gravitational potential energy when a mass moves from r1 to r2. | ||
| 9.12 Gravitational Potential Energy Close to the Earth's Surface | Show how ΔU = −GMm(1/r2 − 1/r1) simplifies to mgΔh for small heights. | ||
| 9.13 Escape Speed | Derive the escape speed expression vesc = √(2GM/R) from energy conservation. | ||
| 9.14 Energy of Satellite | Compare kinetic, potential, and total mechanical energy of a satellite in a stable circular orbit. | ||
| Chapter 10 | Simple Harmonic Motion | 10.1 Free Oscillations | Define free oscillation and state what is conserved in an ideal undamped oscillator. |
| 10.2 Simple Harmonic Motion (SHM) | Verify that x = x0 cos(ωt) satisfies a = −ω²x and find maximum speed ωx0. | ||
| 10.3 Simple Pendulum | Calculate the time period of a simple pendulum of length 0.99 m at g = 9.81 m/s². | ||
| 10.4 Loaded Vertical Spring | Find the oscillation period of a 0.50 kg mass on a spring of spring constant 50 N/m. | ||
| 10.5 Vertical Oscillation of a Cylinder | Show that a floating vertical cylinder displaced slightly executes SHM when restored by buoyancy. | ||
| 10.6 Relation Between SHM and Circular Motion | Explain how SHM corresponds to the projection of uniform circular motion onto a diameter. | ||
| 10.7 Energy in Simple Harmonic Motion | Sketch kinetic, potential, and total energy against displacement x for an SHM system. | ||
| 10.8 Damped Oscillation | Sketch displacement-time graphs for light, critical, and heavy (over-) damping. | ||
| 10.9 Forced Oscillation and Resonance | Explain resonance and how damping affects amplitude and resonant frequency in forced oscillations. | ||
| Chapter 11 | Elasticity | 11.1 Hooke's Law | State Hooke's law and calculate the extension of a spring (k = 200 N/m) under a 30 N load. |
| 11.2 Young Modulus | Define tensile stress, tensile strain, and Young modulus E, including their SI units. | ||
| 11.3 Determination of Young Modulus | Outline how to measure Young modulus of a metal wire using a reference wire and vernier scale. | ||
| 11.4 Behaviour of a Wire | Label the limit of proportionality, elastic limit, yield point, and breaking point on a stress-strain graph. | ||
| 11.5 Energy Stored in a Stretched Wire | Calculate the elastic strain energy stored using ½Fx or ½ × stress × strain × volume. | ||
| 11.6 Phases of Matter | Compare solid, liquid, and gas phases in terms of molecular spacing, forces, and motion. | ||
| 11.7 Brownian Motion | Explain how microscope observation of smoke particles supports the kinetic model of gases. | ||
| 11.8 Basic Assumptions of the Molecular Model of Matter | List key assumptions of the kinetic-molecular model for an ideal gas. | ||
| 11.9 Types of Solids | Contrast crystalline and polymeric/elastomeric solids in terms of atomic/molecular arrangement. | ||
| 11.10 Amorphous Materials | Explain why amorphous solids (such as glass) lack long-range periodic order and sharp melting points. | ||
| 11.11 Interatomic Forces | Describe how interatomic force changes from repulsive at short range to attractive at larger separation. | ||
| 11.12 Potential Energy Curve | Identify the equilibrium separation r0 on an interatomic potential energy vs. separation curve. | ||
| Chapter 12 | Thermometry | 12.1 Temperature and Heat | Distinguish clearly between temperature (internal kinetic indicator) and heat (energy in transit). |
| 12.2 Thermal Equilibrium | Explain what happens to net heat transfer and temperature when two bodies reach thermal equilibrium. | ||
| 12.3 Zeroth Law of Thermodynamics | State the zeroth law and explain how it makes temperature measurement with a thermometer possible. | ||
| 12.4 Temperature Scale | Convert temperatures between Celsius (°C) and Kelvin (K) accurately. | ||
| 12.5 Defining an Empirical Scale of Temperature | Explain why different thermometers can disagree between fixed points on an empirical scale. | ||
| 12.6 Types of Thermometer | Give one advantage and one limitation of a resistance thermometer vs. a thermocouple. | ||
| 12.7 Thermodynamic Scale of Temperature | State why the thermodynamic temperature scale is independent of the physical properties of any substance. | ||
| 12.8 The Ideal Gas Scale of Temperature | Explain how temperature is defined on the ideal gas scale using pressure at constant volume. | ||
| Chapter 13 | Heat Capacity and Latent Heat | 13.1 Specific Heat Capacity | Calculate the thermal energy required to raise 1.5 kg of water from 20°C to 80°C (c = 4180 J/(kg·K)). |
| 13.2 Determination of Specific Heat Capacity — Electrical Methods | Write the energy balance equation VIt = mcΔθ + heat loss for an electrical heater method. | ||
| 13.3 Continuous Flow Method — Callendar and Barnes' Method | Explain how two flow rates allow elimination of constant heat loss to surroundings in continuous flow. | ||
| 13.4 Change of Phase | Explain why temperature stays constant during melting or boiling despite continuous heat input. | ||
| 13.5 Measurement of Specific Latent Heat of Fusion of Ice — Electrical Method | Calculate specific latent heat of fusion from heater power, time, and mass of melted ice. | ||
| 13.6 Determination of Specific Latent Heat of Vaporisation — Electrical Method | Describe how to measure specific latent heat of vaporisation of a liquid using electrical heating. | ||
| 13.7 Cooling Effect of Evaporation | Explain in molecular terms why evaporation of the fastest molecules cools the remaining liquid. | ||
| 13.8 Boiling | State two key differences between boiling and evaporation. | ||
| Chapter 14 | The Gas Laws | 14.1 Boyle's Law | Apply p1V1 = p2V2 to find the new pressure when gas volume is halved at constant temperature. |
| 14.2 Charles' Law | Explain why volume is proportional to thermodynamic temperature (in K), not degrees Celsius, at constant p. | ||
| 14.3 The Ideal Gas Equation | Use pV = nRT to find the number of moles of an ideal gas at given p, V, and T. | ||
| 14.4 The Kinetic Theory of Gases | State the assumptions of the kinetic theory of an ideal gas. | ||
| 14.5 Derivation of an Expression for the Pressure of an Ideal Gas from the Kinetic Theory of Gases | Trace the main steps leading to p = ⅓ρ⟨c²⟩ for molecules in a box. | ||
| 14.6 Mean Kinetic Energy and Temperature | Show that mean translational kinetic energy is directly proportional to Kelvin temperature (3/2kBT). | ||
| 14.7 Applications of the Kinetic Theory of Gases | Calculate root-mean-square speed crms of gas molecules at a specified temperature and molar mass. | ||
| 14.8 Distribution of Molecular Speeds | Sketch how the Maxwell-Boltzmann speed distribution shifts as temperature increases. | ||
| Chapter 15 | Thermodynamics | 15.1 Internal Energy | Define internal energy and state what it consists of for an ideal monatomic gas. |
| 15.2 First Law of Thermodynamics | Apply ΔU = q + W (or ΔU = Q − W) with proper sign conventions for heat and work. | ||
| 15.3 Work Done by a Gas | Calculate work done when a gas expands from 0.020 m³ to 0.050 m³ at constant pressure 1.0 × 10⁵ Pa. | ||
| 15.4 Work Done during Isothermal Change | Write and evaluate the isothermal work expression W = nRT ln(V2/V1). | ||
| 15.5 Molar Heat Capacities of a Gas | Distinguish between molar heat capacity at constant volume (Cv,m) and constant pressure (Cp,m). | ||
| 15.6 Relationship Between Cv,m and Cp,m | Explain why Cp,m > Cv,m (Mayer's relation Cp,m − Cv,m = R) for an ideal gas. | ||
| 15.7 Adiabatic Changes | Define an adiabatic process and state what happens to gas temperature during adiabatic expansion. | ||
| 15.8 Adiabatic Equations | Apply pVγ = constant to compare pressure and volume between two adiabatic states. | ||
| 15.9 Reversible Processes | Explain what characterizes a quasi-static reversible thermodynamic process and why real processes differ. | ||
| Chapter 16 | Thermal Conduction | 16.1 Mechanism of Thermal Conduction | Explain how lattice vibrations and free electrons conduct heat in metals vs. insulators. |
| 16.2 Thermal Conductivity | Use dQ/dt = −kA(dT/dx) to calculate rate of heat conduction along a uniform bar. | ||
| 16.3 Insulated Rod and Non-Insulated Rod | Explain why temperature gradient along a well-insulated rod is uniform in steady state. | ||
| 16.4 Determination of Thermal Conductivity of a Good Conductor — Searle's Method | Identify the key measurements needed in Searle's bar apparatus to find k of a good conductor. | ||
| 16.5 Determination of Thermal Conductivity of a Poor Conductor — Lees' Method | Explain how Lees' disc method determines k for a thin poor conductor such as cardboard or glass. | ||
| 16.6 Thermal Resistance | Define thermal resistance Rth = L/(kA) and compare it to electrical resistance. | ||
| 16.7 Thermal Conductors in Series | Find the equivalent thermal resistance and interface temperature for two slabs in series. | ||
| Chapter 17 | Convection and Radiation | 17.1 Convection | Explain how density changes driven by temperature differences produce natural convection currents. |
| 17.2 Applications of Convection | Explain how convection applies to room heaters, sea/land breezes, or cooling fins. | ||
| 17.3 Radiation | State how thermal radiation differs from conduction and convection regarding a medium. | ||
| 17.4 Detectors of Thermal Radiation | Name two infrared/thermal radiation detectors and state their operating principle. | ||
| 17.5 Absorption and Emission of Radiant Energy | Explain why matte black surfaces are good emitters and absorbers compared to shiny silvered ones. | ||
| 17.6 Black Body Radiation | Define an ideal black body and explain how a small hole in a cavity approximates one. | ||
| 17.7 Energy Distribution in the Spectrum of a Black Body | Describe how peak wavelength shifts to shorter values as temperature rises (Wien's law concept). | ||
| 17.8 Stefan's Law | Calculate total radiated power from a black body of area A at temperature T using P = σAT⁴. | ||
| 17.9 Inverse Square Law | Explain how radiation intensity decreases as 1/r² from a point source in uniform space. | ||
| 17.10 Temperature on the Surface of the Sun | Outline how solar luminosity/intensity and radius are used to estimate the Sun's surface temperature. | ||
| 17.11 Equilibrium Temperature of the Earth's Surface | Set up the energy balance between absorbed solar power and emitted thermal radiation for Earth. | ||
| Answers | Answers Section | End-of-volume solutions/answers reference | Verify your numerical answers, units, and significant figures against the end-of-volume key. |
Note: This contents guide provides a structured overview of the topics and self-evaluation exercises in A Level Physics Volume 1. Always refer to your official syllabus and learning materials for examination requirements.
Start Your A Level Physics Learning Journey
A Level Physics Volume 1 provides a strong foundation for understanding the physical principles that govern motion, forces, energy, matter, and heat. By studying these 17 chapters systematically and completing the self-evaluation exercises, students can develop essential conceptual understanding, mathematical skills, and problem-solving abilities needed for advanced physics.
Work through each chapter step by step, practise applying the relevant equations, and review your answers regularly to build confidence in A Level Physics.
Strong Scientific Foundations
Understand the fundamental laws of nature through mechanics, oscillations, materials, thermal physics, and scientific principles.
Critical & Analytical Thinking
Develop problem-solving skills, mathematical reasoning, and the ability to interpret and explain physical phenomena.
Preparation for Advanced Physics
Build the knowledge and confidence needed to explore more advanced topics in electricity, electromagnetism, and modern physics.
Continue Your Physics Learning Journey!
Your journey does not end here. Explore more advanced concepts, discover new scientific ideas, and expand your understanding of Physics in Volume II.
Explore A Level Physics Volume II →